“The E-Scout-LB: where heavy-duty meets high-efficiency. Designed for crews that move more, lift smarter, and never waste a day.”
E-Scout-LB
Full-Length Hydraulic Dump Insert System Built for Bigger Loads, Longer Days, and True Commercial Duty.
The Rival E-Scout-LB transforms any 8-foot pickup into a full-scale hydraulic dumper ready for professional duty. Designed for ¾- and 1-ton trucks, the long-box series offers greater material volume and superior stability under load, powered by a 3-ton hydraulic scissor hoist and reinforced steel sub-frame. Choose from four configurations – from the base liner-and-gate setup to the Chipper+ and Pauldron assemblies with integrated tool cabinets – each built from marine-grade aluminum and engineered to perform season after season. For operators who need maximum capacity without sacrificing modularity, the E-Scout-LB stands unrivaled.
Starting At
What is the availability of the E-Scout-LB?
Regularly built & stocked. During busy seasons, may not always be in stock.(Contact us for up-to-date stock levels)
What vehicles does Rival make E-Scout-LB's for?
LB (8′ Box) Domestic (Ford / Chevy / Dodge) Pick-Up Trucks Years 2000 – to – date
Got a Short Box? Check out the E-Scout-SB
Got a Mini truck (like a Maverick)? Check out the E-Scout-MINI
How much does a E-Scout-LB weigh?
Please contact us; we can provide an estimated weight alongside your quote request.
What materials are E-Scout-LB's made from?
Aluminum 5052-H32 Millplate
Aluminum 6061-T6 Extrusions
Black Painted Mild Steel (Hoist/Subframe)
How much, and how long does it take to install an E-Scout-LB?
Approximately ~$700.00 for Installation at Rival Truck in Parksville, B.C.
(ESTIMATE – EACH TRUCK VARIES!)
≤ 1 Day; not guaranteed. We ask all clients to be ready to reserve a hotel for worst case scenario. However, 99% of our E-Scout installs are same-day completion.
What is the typical application for a E-Scout-SB?
#1) Municipal & Public Works Departments
#2) Landscaping & Construction Fleets
#3) Arborist & Tree Service Companies
#4) Agriculture & Ranch Operations
How are E-Scout-SB attached?
The E-Scout-LB is attached to our Steel 3T Hydraulic Scissor Hoist Sub-Frame, which is bolted to the truck frame itself via the pick-up bed. This gives the aluminum the flexibility to perform for the long haul on even the roughest of roads.
What models are available?
E-Scout-LB : Dumping Insert Liner + Tailgate Only (No Bulkhead)
E-Scout-LB-BB : Dumping Insert Liner + Front Bulkhead and Side Boards (TARP SOLD SEPARATELY)
E-Scout-LB-CHIPPER : Dumping Insert Liner + Chipper Canopy and Upper Swing Gate (For Arborists)
E-Scout-LB-CHIPPER+ : Dumping Insert Liner + Chipper Canopy, Upper Swing Gate, and Added Integrated Side Cabinets on both sides (For Arborists, premium)
E-SCOUT-LB-PAULDRON : Dumping Insert Liner + Full Length Side Cabinets (TARP SOLD SEPARATELY)
Where can I purchase or order a E-Scout-LB?
E-Scout’s are exclusively sold at Express Custom. Express Custom can arrange shipping to anywhere in North America.
What are the dimensions of the E-Scout-LB Models?
E-SCOUT-LB:
Bed Length: 116.50″
Bed Height: 25.50″
Bed Width: 48″/60″
What is the Warranty of the E-Scout-LB?
2 Year Limited
(learn more)
Got more questions? Contact our team!
Maximum Volume, Minimal Effort.
Built for longer wheelbases and higher daily demand, the E-Scout-LB is the commercial-grade expansion of our short-box model; boasting the same 3-ton hydraulic scissor hoist and chainless tailgate system, but with extended tub length for 8-foot beds. The extra capacity and weight distribution make it ideal for high-volume materials like soil, gravel, or chipper waste. Its modular design supports multiple upgrade paths: add a bulkhead with sideboards for containment, fit a Chipper or Chipper+ canopy for arborist work, or step up to the Pauldron configuration with full-length side cabinets and optional tarps. Every version shares the same self-aligning sub-frame, double-acting KTI powerpack, and sealed aluminum tub for dependable year-round service.
For contractors, municipalities, and crews who demand productivity over downtime, the E-Scout-LB converts any heavy-duty pickup into a high-capacity dumper that pays for itself in efficiency. Easy to remove, easy to service, and infinitely upgradeable, it’s the smarter path to true truck-based utility; not a compromise. When you need to move more in fewer trips, the E-Scout-LB is the obvious choice.
4 Distinct Configurations to choose from.
3-Way Tailgate
- Stops at 90-degrees like a OEM Tailgate by releasing top pins
- Can be closed (first lower hole), open slightly (second lower hole), or open for spreading (third lower hole).
- Leaving only the top pins in place gives you full spread/pour
- Or, remove all the pins and take the tailgate off altogether!
Dumping Insert Liner
- 3/16″ Aluminum Construct
- 3T Hydraulic Scissor Hoist
- Removable panel for pump/hydraulics servicing
E-SCOUT-LB
Dumping Insert Liner + Tailgate Only (No Bulkhead)
Estimated Capacity
3-Way Tailgate
- Stops at 90-degrees like a OEM Tailgate by releasing top pins
- Can be closed (first lower hole), open slightly (second lower hole), or open for spreading (third lower hole).
- Leaving only the top pins in place gives you full spread/pour
- Or, remove all the pins and take the tailgate off altogether!
Dumping Insert Liner
- 3/16″ Aluminum Construct
- 3T Hydraulic Scissor Hoist
- Removable panel for pump/hydraulics servicing
Bulkhead & Side Boards
- 3/16″ Aluminum Construct
- Provisioned for Tarp; Tarps sold separately.
- Mesh-Covered window cutouts
- 2 x 6 FIR Boards painted with SharkSkin Deep Base Acrylic Urethane Wood Stain (72401)
E-SCOUT-LB-BB
Dumping Insert Liner + Front Bulkhead and Side Boards (TARP SOLD SEPARATELY)
Estimated Capacity
3-Way Tailgate
- Stops at 90-degrees like a OEM Tailgate by releasing top pins
- Can be closed (first lower hole), open slightly (second lower hole), or open for spreading (third lower hole).
- Leaving only the top pins in place gives you full spread/pour
- Or, remove all the pins and take the tailgate off altogether!
Dumping Insert Liner
- 3/16″ Aluminum Construct
- 3T Hydraulic Scissor Hoist
- Removable panel for pump/hydraulics servicing
Chipper Canopy
- 3/16″ Aluminum Construct
- 3x crossmembers on top for long material/ladder transport.
Upper Swing Tailgate
- Opens 270-degrees
- Able to be held-open with door-catch
E-SCOUT-LB-CHIPPER
Dumping Insert Liner + Chipper Canopy and Upper Swing Gate (For Arborists)
Estimated Capacity
3-Way Tailgate
- Stops at 90-degrees like a OEM Tailgate by releasing top pins
- Can be closed (first lower hole), open slightly (second lower hole), or open for spreading (third lower hole).
- Leaving only the top pins in place gives you full spread/pour
- Or, remove all the pins and take the tailgate off altogether!
Dumping Insert Liner
- 3/16″ Aluminum Construct
- 3T Hydraulic Scissor Hoist
- Removable panel for pump/hydraulics servicing
Chipper Canopy
- 3/16″ Aluminum Construct
- 3x crossmembers on top for long material/ladder transport.
Upper Swing Tailgate
- Opens 270-degrees
- Able to be held-open with door-catch
Side Cabinets (Pauldrons)
- Hinge-Up Doors w/ Locking Handles
- Gas Shocks to support door when open
- 18″D x 24″H x full-length
E-SCOUT-LB-CHIPPER+
Dumping Insert Liner + Chipper Canopy, Upper Swing Gate, and Added Integrated Side Cabinets on both sides (For Arborists, premium)
Estimated Capacity
Important Notice Regarding WEIGHT CAPACITY
PLEASE Note: You must limit actual load by your TRUCK Payload; not just using the capacity above. In almost every scenario, the e-scout is capable of lifting MORE than your pick-up, but that does not enable it to do it as the truck would fail. Truck Rating supercedes E-Scout Rating; Go with the lower of the two.
Options & Extras
Built in-house, from start-to-finish. We can tailor your Paladin to suite your exact needs. We can add, remove, augment, or modify any aspect of your build. When ‘basic’ just wont cut it, chat with our team about what we can do to make your rig yours.
Tarp
Extra Electrical ⚡
We can add work lights, traffic advisory lights, buggy whips, audio systems, wireless-controllers, or anything else you need.
Trim Packages & Colors
We have many pre-thought-out color/trim packages. Or, got a custom color theme in mind? No problem. Just talk to our team.
Coal Chute
Rival Manufacturing
Delivering premium product, everytime.
1365 Alberni Hwy
Parksville, BC, V9P 2B9
PO BOX 487
Parksville, BC, V9P 2G6
Prices posted online may not be kept up-to-date in realtime due to human delay. We make our best efforts to update information online as soon as possible.
Content, images, and information property of Express Custom Manufacturing 2024 LTD. Copyright 2024
web design armada projects